Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
1. Extend the hose straight from
the reel housing.
3–5 cm
3. To retract the hose, tug on it 3–5 cm and allow the hose
to automatically retract. Hold onto the end of the hose and
follow it back as it rewinds into its housing.
N.B. It is easier for the hose to retract if it is not under
pressure. Turning off the compressor makes this easier.
Care and maintenance
Do not store the hose in environments with extreme high or low temperatures since
the hose may become difficult to handle and retract.
Never immerse the hose in water for cleaning. If the hose is dirty, clean it before you
return it to its housing. Never use solvents or abrasive cleaning agents.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of how
to dispose of this product, please contact your municipality.
Specifications
Hose length
Hose dimensions
Hose material
Operating pressure
2. The hose will remain in
the extended position.
9 + 1 m
ø 8 mm internal, ø 12 mm external
PU
Max. 15 bar
4
4. Only let go
of the hose
once it is fully
retracted.
Werbung
Inhaltsverzeichnis
