Maintenance And Care; Warranty - AEG ED 10 Bedienungs- Und Sicherheitshinweise

Security / Use
Change all batteries simultaneously and only
use batteries of the same type.
Use
Install batteries / exchange
Loosen the screw on the battery compart-
ment lid using a cross-head screwdriver.
9
Push the battery compartment lid away
9
from the casing in the direction shown by
the arrow.
Remove the battery compartment .
16
Install 4 new batteries of type 1.5 V AA into
the battery compartment (Remove the
16
used batteries first). Observe the correct
battery polarity. This is displayed within the
battery compartment .
16
Replace the battery compartment into
16
the casing in the correct direction, and then
replace the battery compartment lid .
9
As soon as the batteries are used up and
should be exchanged, the LED display
4
light up.
Replace the batteries as described above.
Switching the Endoscope on / off
To switch the Endoscope on, use the ON /
OFF button . The Power LED will light
7 3
up and shows that the unit is functional. The
LCD display displays the camera image
2
To switch the Endoscope off, use the ON /
OFF button . The Power LED will be
7 3
switched off and the LCD display will also
2
be switched off.
Using the Endoscope
Switch on the Endoscope ED 10 as described
above.
Set the image brightness to the desired level
by pressing the + brightness button and
6
the – brightness button .
8
14 GB
Press the + and - brightness buttons
6 8
simultaneously and hold them in order to
turn the image by 180°.
Place the flexible gooseneck into the
10
area to be examined. Make sure that the
gooseneck 10 is always easy to manoeuvre.
You can move the gooseneck in every
10
conceivable direction, making it possible to
examine areas that would otherwise be
difficult to access.
Assembling the accessory parts
Select the mirror probe , in order to
12
access inaccessible areas.
Select the magnet probe 13 , to attract
magnetic objects.
Select the hook attachment , in order to
14
"fish out" selected objects.
Push the selected attachment ,
12
on to the camera . The clamping ring
11
should fit into the recess.
will Press the opened clamping ring
17
until it clicks into place. Always check that it
is securely in place before beginning work
with the Endoscope ED 10.
Remove the selected accessory by carefully
opening the clamping ring and removing
17
the attachment from the camera
Using the AV cable
.
11
Using the AV cable , you can display the cam-
15
era image on an external unit (monitor or
11
recording device).
Plug the AV cable into the AV output
15
socket 5 .
Plug the yellow plug into the VIDEO-IN
socket of a monitor or a recording device.

Maintenance and care

The device is maintenance-free.
WARNING!
vices from the power supply, before you carry
out service etc.
Clean the device with a dry cloth. Do not use
solvents or other aggressive detergents
under any circumstances.
Service
WARNING!
device to qualified technical personnel to
repair. Thus the safety of the device is guaran-
teed and maintained.
WARNING!
or plug or the connecting cable always to quali-
13 14
fied technical personnel. Thus the security of
17
the equipment is guaranteed and maintained.
together

Warranty

The general guarantee conditions refer to
production and material defects.
.
11
If the device is faulty, bring it to your specialist
dealer respectively back to the sales office. In
order to accelerate the warranty and repair work
on the device, you need the following:
- A copy of the receipt (delivery note, bill)
with the acquisition date.
- Reason for the complaint or description of
the error.
Disposal
The packing consists of pollution free materials,
which can dispose of you over the local recy-
cling stations.
Maintenance and care / Service / Warranty / Disposal
In accordance with European guideline
Always separate electrical de- Always separate electrical de- 2002 / 96 / EC for electrical and old electronic
devices and conversion to national law, used
electrical appliances must be collected separate-
ly and brought to a environmental fair recycling.
For disposal possibilities for retired electrical
appliances please inform yourself at your
community or city administration.
Leave the repair of the
Batteries may not be disposed of in normal
household waste. They can contain toxic heavy
metals and are subject to hazardous waste treat-
Leave the exchange of the
ment regulations. The chemical symbols of the
toxic metals are as follows: CD = Cadmium,
Hg = Mercury, Pb = Lead. Always dispose of used
batteries at a municipal refuse collection point.
Illustrations may vary slightly from the product
itself. We reserve the right to administer chang-
es due to technical progress. Decoration not
included.
Do not throw electrical appliances
into the domestic waste!
Dispose of the batteries in an
environmentally friendly way!
GB 15