Using The Valve Adapter; Maintenance And Care; Maintenance; Care - Eufab 16643 Bedienungsanleitung

6.5.2 USING THE VALVE ADAPTER

Universal adapter for leisure articles (15a and 15b):
Open the lock of the valve connection (Figure 7). Insert a universal adapter into the valve connection. Lock the valve connection
(Figure 9). Insert the universal adapter into the filling connection of your leisure equipment. Depending on version, it is possible
that the universal adapter will need to be held firmly during the filling process. Now you can switch on the compressor and
start the filling process. When the desired air pressure is reached, switch the compressor off. Remove the adapter from the valve
connection by proceeding in reverse order, as described above.
Adapter for balls (15c):
Open the lock of the valve connection (Figure 7). Insert the adapter for balls into the valve connection. Lock the valve connection
(Figure 9). Insert the adapter into the valve of the ball. Now you can switch on the compressor and fill the ball. When the desired
air pressure is reached, switch the compressor off. Remove the adapter from the valve connection by proceeding in reverse order,
as described above.

7. MAINTENANCE AND CARE

7.1 MAINTENANCE

Store the Power Pack in a dry, frost-free place. If the Power Pack is not used for a longer period of time, it must be recharged. In
winter, recharge every two months, in summer recharge every month.

7.2 CARE

Switch the power pack off before cleaning. Clean the housing of the power pack with a soft, dry cloth. Do not use any abrasive
or solvent-based cleaning agents. Never allow liquids to get into the housing.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with household waste! Electrical devices and electronic scrap must be col-
lected separately and disposed of in an environmentally responsible manner for recycling. Please contact your
community or city administration regarding disposal options for electrical and electronic scrap.
You are legally obliged to return batteries and battery packs. After use, they may be returned to us, handed in to
a communal collection point, or to a local dealer. Batteries containing hazardous materials are labelled with a
symbol consisting of a crossed out trash can and the chemical symbol (Cd, Hg or Pb) which designates the heavy
Pb
metal responsible for the hazard.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
15a Universal adapter small
15b Universal adapter big
15c Adapter for balls
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
13