Chauvet DJ Freedom Par TRI-6 Kurzanleitung Seite 3

EN
What is
Included
To Begin
Description
Overview
AC Power
Power Linking
Fuse
Replacement
· Freedom™ Par Tri-6
· Power Cord
· IRC-6
Unpack your Freedom™ Par Tri-6 and make sure you have received all parts
in good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The Freedom™ Par Tri-6 is a wireless, battery-operated, tri-color LED Par
with a built-in D-Fi™ transceiver. It works with the FlareCON™ app and
IRC-6 for wireless triggering and control. You can wirelessly master/slave
this fixture with other Freedom™ fixtures for a coordinated light show. Shine
light where it is needed using the built-in adjustable kickstand. Extend the
battery's lifespan with built-in discharge protection. Safely store and
transport your fixtures from gig to gig in the CHS-FR4 carry bag available
from CHAUVET®. The Freedom™ Par Tri-6's compact and lightweight
design easily fits inside sticks of TRUSST®.
On/Off
Switch
DMX In
Fuse Holder
Power In
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
For the maximum number of Freedom™ Par Tri-6 products that you can
power link at each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
· Warranty Card
· Quick Reference Guide
Kickstand
Carry
DMX Out
Handle
Microphone
Display
Power Out
3
Freedom™ Par Tri-6 QRG
Infrared Sensor
Battery Life
Indicator LEDs
D-Fi™ AUTO
Sync/Clear Button
Glare
Shield
Menu
Buttons