Planet POE-151 Bedienungsanleitung Seite 8

4. Connect with IEEE 802.3af devices. Base on IEEE 802.3af standard,
the POE-151/POE-152 can directly connect with any IEEE 802.3af
end-nodes like wireless access point, VoIP phones and IP camera that
support IEEE 802.3af Power over Ethernet interface.
For POE-161, base on IEEE 802.3at standard, the POE-161
can directly connect with any IEEE 802.3at end-nodes such
as PTZ (Pan, Tilt & Zoom) IP camera, Speed Dome, high
power consumption wireless LAN access point that support
Note
IEEE 802.3at Power over Ethernet port.
Ethernet Switch
AC
Figure 3: Connection to IEEE 802.3af Device
5. Once POE-151/POE-152 detects the existence of an IEEE 802.3af
device, the LED indicator will be steady ON to shows it is providing
power. The same to POE-161 that detects the existence of an IEEE
802.3at / af device.
If the connected device is not fully complying with IEEE
802.3af standard, the LED indicator of POE-151/POE-152
will not be steady on.
Note
1. Since the POE-161 PoE port supports 56V DC PoE
power output, please check and assure the Powered
Device (PD) acceptable DC power range is from 52 to
56V DC. Otherwise, it will damage the Powered Device
(PD).
Note
2. If the connected device is not fully complying with IEEE
802.3at / af Power over Ethernet, the LED indicator of
POE-161 will not be steady on.
1-4
100 meters
48V DC
Ethernet
Data
DC
Power
POE-151/152
PoE Injector
PoE-IEEE 802.3af PoE
Ready
Power in-use
PWR
Ethernet+DC
Data Power
PoE
DC Power Line (DC)
AC
Power Line (AC)
100Base-TX UTP
PoE 100Base-TX UTP with PoE
PoE IP Camera