ASCOM a71 Bedienungsanleitung Seite 7

Location function (IR or LF)
The location of the transceiver, received via either infrared light
(IR) or low frequency transmission (LF), is automatically sent
along with an alarm.
Note: The top glass of a transceiver with an IR receiver must
never be covered.
Special location
If the fixed locators are set to send a special location code, the
transceiver will send an location alarm directly after it has
received the code. "Special location sent" is shown in the
display.
Alarm data
Press , select , select "Alarm Settings" and "Alarm Data".
Type the alarm data and press "Save". The saved data is sent
when an alarm is transmitted.
Deactivate/activate alarms
The Pull-cord alarm, Man-down alarm & No-movement alarm
can be turned off/on; Press , select , select "Alarm
Settings". Scroll to the desired alarm using . Press to
deactivate/activate the alarm. Press to leave the screen or
to return to idle mode.
Note: The Alarm push-button is always enabled.
6