Pioneer SE-MJ771BT Bedienungsanleitung Seite 16

6. Enjoying music
To use the wireless headphones to listen to music from a Bluetooth device, you must
first perform pairing with the Bluetooth device using the A2DP audio profile.
For details on how to perform pairing, see P.10.
(1) With power to the wireless headphones' turned off, hold the ( ) button depressed for
about three seconds.
The headphones' power will turn on and the LED indicator will flash blue.
(2) Turn on the Bluetooth function on the device you wish to connect to.
When pairing is completed, the wireless headphones will automatically connect to
the Bluetooth device.
* If automatic connection is not achieved, or the headphones automatically connect to a
different Bluetooth device than the one you wish to use, follow the instructions for the
desired Bluetooth device regarding manual connection.
Controls when listening to music
If the connected Bluetooth device supports AVRCP, the following operations can be used.
Press once
) button : Increase volume.
(
( ) button : Decrease volume.
( ) button : Advance to next track or chapter.
( ) button : Return to beginning of track or chapter.
( ) button : Play/Pause.
* When sound volume is set to maximum or minimum levels a beep sound will be pro-
duced from the headphones.
* Sound volume can be adjusted on the matching Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, the controls noted
above and controls on the Bluetooth device may not be supported.
* Depending on the specifications of the connected Bluetooth device, the music playback
settings may need to be configured. Consult the user's manual for the Bluetooth device.
* Depending on the specifications of the connected Bluetooth device, a music playback
application may start automatically or the music cannot be paused/played. Consult the
user's manual for the Bluetooth device.
Using the headphones cord
The furnished headphones cord can be used to listen to playback. (see Fig. 6).
Note
• Connect the straight plug to the headphones' jack, and connect the L-type plug to the
playback device.
• Insert the plug fully and securely.
Failure to insert the plug sufficiently may result in reduced audio output from the
headphones, or other malfunctions.
• The Bluetooth function cannot be used while the headphone cord is in use.
• If you begin using the headphone cord when power is already turned on, power to the
unit will be automatically disconnected.
12
En