CASO DESIGN WK2500 Original Bedienungsanleitung Seite 31

Quickstart: Press the
temperature (factory setting 99°C). The LED of
cooking.
Temperatur setting:
A) With the -button you can select the preset temperature levels (40, 70, 80, 90, 95,
99 °C) and start cooking with the
B) You can change the temperature. If choose 40°C with the
the temperature with +/- buttons in 1°C steps. If choose 70, 80, 90, 95, 99, you can set
the temperature with +/- button from 35° - 95° in 5°C steps.
You can start the cooking with the
mode after cooking.
Alternatively you can press the
warm function is activated. You can start the cooking with the
Please note
► The blue LED of the
► You can stop the cooking at any time by pressing the
► Press the button longer and the device switches to standby-mode. The display will
switch off.
► When the keep warm function is activated, then you can stop the function by pressing
the button. Then the red LED of the
keep warm function then the device keeps the water warm for 2 hours.
► If the cooking is not yet been startet with
cancled by pressing button
► During cooking/keep warm the temperature can be changed.
► The device can be reactivated, by pressing of any button.
-button. The device starts cooking immediately with last selected
button. The LED of the
button and the device will switch to standby-
button, until the LED lights up in red, then the keep
button will switch off after 3 seconds without any operation.
again.
-button lights up in white during
button.
button will switch off. If you do not stop the
, then the keep warm function can be
button lights up in blue.
button then you can set
button.
31