Inhaltsverzeichnis
Werbung
*
A signal error can occur in the following situations:
- No signal
- HDCP signal
- Unsupported resolution
- PC or tablet in sleep mode
Check your cable connection, adjust the source resolution or wake up the source device to
solve these issues.
Capturing protected content like HDCP is not supported; if video source is
HDCP-protected, images will not show properly.
Button
Press to turn on the device.
Press and hold for 4 seconds to turn off the device.
Press to start recording, press again to stop recording.
Press to mute, press again to unmute.
Press and hold to start sound test, release to stop.
* Excessive sound can cause recording distortion. When the Status Indicator turns
constantly, lower the volume or move the device further away from the sound.
Status
Mute
Unmute
Functions
turns
Red
when the surrounding sound is too loud. *
English – 5
Quick Installation Guide
Solid
Red
Off
Red
Werbung
Inhaltsverzeichnis
