Factory Reset; Status Led; Half Press/Full Press Indicator - PocketWizard PLUS IV Schnellanleitung

CABLES / FACTORY RESET / STATUS LED / HALF/FULL PRESS FEATURE
Remote camera and
flash sync cables
not included.
Find the correct cables
for your remote camera or flash:
pocketwizard.com/support/cable_finder

Factory Reset

Hold TEST as you power on the radio to reset it to factory defaults:
Channel 17 with all Zones enabled, TxRx Mode.

Status LED

Illuminates AMBER (half)
with sync contact or TEST press,
and shows remaining battery level
with colors and a blinking pattern.
Half/Full Press Indicator
Indicates half and full press operation
for remote camera shutter. Requires
Channels 17 and higher. Works
with a Plus III or a Plus IV using
-ACC / stereo remote camera cables.
/ RED (full)
Full Press
Half Press
Color and number of
blinks indicate battery
Green
Amber
Red
PocketWizard.com
life remaining
> 1/2
< 1/2
< 1/4
|
11