Assembly
The assembly of the window ventilation unit is done together with the
window!
Attention! In the area marked "Technical" only the openings of the screw
sleeves may be used for fastening purposes; the area is marked with labels.
The power cable is to be led out below the profile at the side and must be
laid concealed in a cable guide track.
Be careful when assembling not to damage the power cable!
Assembly example: side assembly
Internal
External
Technical area
(hatched area):
Only use the screw
sleeves for fasten-
ing here!
A warning label
marks this area
over the entire
length!
Power cable
EN
Window
15