Technical Specification - MELICONI AT 40 Anleitung

E
To receive digital terrestrial signals, connect the antenna to a decoder using the adapter
provided. Once the antenna has been installed, search for the channels following the
instructions provided with the digital terrestrial decoder.
To improve signal quality, see paragraph C.
F
To use the Meliconi antenna with your radio, you need to use an adaptor (not included)
to connect the output of the antenna to the socket on the radio. To improve signal quality,
see paragraph C.
G
To use on a boat or in a camper, you can power your antenna through the 12 V DC input,
making sure the poles are as follows:
Keep these instructions for future use.
GUARANTEE: 2 YEARS
Tampering with the device or improper use invalidates the guarantee.

TECHNICAL SPECIFICATION

• Gain (antenna + amplifier)
• Power
• Consumption
• Output
Safety systems in accordance with EN 60065
4
Receiving digital terrestrial signals (FIG. 2)
Receiving FM radio (FIG. 3)
Using on holiday
UHF/VHF max 40 dB (
UHF/VHF max 43 dB (
230-240 V 50-60 Hz or 12 VDC
3 VA
75 Ohm
A - 40
T
)
)
A T -43