How To Assemble - Fridja f1900 Bedienungsanleitung

Pusher
Align
Align the dots
STEP 1
Top-set Assembly
Align the red dots on each part
and assemble in the order shown.
Once assembled, turn the drum lid
clockwise to close.
STEP 2
Top-set and base assembly
Place the bowl on the base so that
its grey arrow lines up with the black
arrow on the base
8
ENGLISH f1900 FRIDJA WHOLE FRUIT SLOW JUICER
HO W TO A SSEMBL E
STEP 1
Top-set Assembly
y Wash the parts before first use.
Check
Before y Ensure that the silicone lip and silicone ring are assembled
Operating
properly.
1. Firmly insert the silicone lip into the slot below the pulp spout.
2. Place the juicing screw/auger into the strainer. Turn and press down on
it until it clicks into place.
3. Assemble the strainer into the rotation wiper then place this assembly
into the juicing bowl ensuring the red dot
with the red dot on the juicing bowl.
|
TIP The Juicer may leak
if not assembled properly.
|
TIP The juicing screw needs to
be locked in place
in order to close the
drum lid.
on the strainer is aligned
9