Presetting Stations In The Tuner Memory - UNITED VMC8244 Bedienungsanleitung

Presetting Stations In The Tuner Memory

You can store up to 40 of your favorite stations (30 FM / 10 AM) in the tuner memory for easy recall at any
time
Using either the manual or automatic tuning method described on page 36, tune to the first station you
1.
wish to memorize. Example: FM 103.5 MHz
Press the MEMORY/CLOCK button on the remote control
2.
The display shows "PROGRAM" and the channel number
"1" indicator flashes.
3. Press the FOLDER UP or DN buttons to
select the preset memory location.
Example "3".
Press the MEMORY/CLOCK button again, the "3" stops
4.
flashing confirming that the station has been stored
in preset channel location "3".
5. Tune to the next station you wish to store
Example: FM 106.7 MHz
Press the FOLDER UP or DN buttons
6.
select the next preset memory location
Example "4".
Press the MEMORY/CLOCK button again to store the
7.
station in preset channel location "4".
8. Repeat steps 5-7 until you have stored up to 30
stations on the FM band.
Press the button to switch to the MW(AM)
9.
band and follow the same procedure to enter up to
15 AM stations in the tuner memory.
EN-28