Werbung
Verfügbare Sprachen
Verfügbare Sprachen
g Operating instruction
Package contents
1 x DVB-T USB stick
1 x CD-ROM wtih driver and software
1 x Passive DVB-T antenna
1 x Printed installation instructions
System requirements for Windows systems
Processor:
1.5 GHz Intel or AMD CPU
RAM:
512 MB or more
Graphics card:
DirectX 9.0c compatible with
64 MB
Sound:
HD Audio compatible
Interface:
One spare USB 2.0 port
Hard drive capacity:
150MB of free storage space for
software an driver installation
Operating system:
Windows XP + SP 3 and
Windows XP x64Bit Edition + SP 2
Windows Vista + SP 2 and Windows 7
Other requirements
In order to receive DVB-T signals, you must ensure that your
region is sufficiently covered by a DVB-T network. In peripheral
regions, the enclosed passive DVB-T antenna may not be
sufficient to allow for perfect reception. In this case, we
recommend that you use either a roof antenna, if available or an
active DVB-T antenna with an integrated amplifier.
Installation with Windows 7 and Vista 32-bit and 64-bit editions
Note: Install the driver before connecting the DVB-T receiver to
your computer or laptop.
Insert the enclosed driver CD into your CD-ROM drive. If the CD
menu does not start automatically, select the CD-ROM drive in
which you have inserted the driver CD and double-click the
-> Autorun.exe file.
When the CD menu appears on your screen, select your
language. Select -> Install Driver in the next window. This will
start the installation program. In some circumstances, you may
be asked by User Account Control whether you want to conti-
nue. Click the -> Allow button. The necessary drivers are
now copied to your system. We recommend that you restart
the operating system after completing installation. Do not
connect the DVB-T receiver until you have done so. After you
have restarted Windows, connect the receiver. The computer
recognises and installs the receiver after a short time.
Important instructions for Windows Vista / 7
You can verify whether the DVB-T receiver has been
successfully installed by checking under Start (Windows logo)
-> Control Panel -> System and Maintenance ->
Device Manager. In some circumstances, you may be asked by
User Account Control to allow this action. Click -> Continue.
The following entry must appear without a yellow exclamation
mark.
Sound, video and game controllers
•
DK DVBT DONGLE
Installation with Windows XP
Notes: Install the driver before connecting the DVB-T receiver
to your computer or laptop.
Ensure that your user account has administrator privileges,
otherwise the installation will not be successful.
We also recommend you ensure beforehand that the latest
Microsoft service pack is installed.
Insert the enclosed driver CD into your CD-ROM drive. If the CD
menu does not start automatically, select the CD-ROM drive in
which you have inserted the driver CD and double-click the
-> Autorun.exe file.
When the CD menu appears on your screen, select your
language. Select -> Install Driver in the next window. This starts
the driver installation program. The program now installs the
necessary driver onto your hard drive. After completing
installation, you must restart your operating system. Do not
connect the DVB-T receiver until you have done so.
Important instructions for Windows XP
You can check whether the DVB-T receiver was installed
properly under Start -> Control Panel -> Performance and Main-
tenance -> System -> Hardware -> Device Manager.
The following entry must appear without a yellow exclamation
mark.
Sound, video and game controllers
•
DK DVBT DONGLE
Installation with Windows XP x64 Edition
Notes: Install the driver before connecting the DVB-T receiver
to your computer or laptop.
Ensure that your user account has administrator privileges,
otherwise the installation will not be successful.
We also recommend you ensure beforehand that the latest
Microsoft service pack is installed.
9
Werbung
