Power Saving Mode - Phocos CXM Bedienungsanleitung

Step 2: Then push the right button to toggle the parameters of the day.
The parameters displayed in the LCD will toggle in this order :
SOC morning (State of Charge in the morning) - SOC evening (State of Charge in the
evening) - V max (Maximum Battery Voltage) - V
bat
Ah (Panel Amperehours) - Ah
in
in the morning) - SOC evening (State of Charge in the evening) - ...
Please see Fig. F (Page 5) for reference.

Power Saving Mode

If no operation are carried out to CXM for more than 15 minutes, the CXM will switch
to Power Saving Mode automatically with nothing displayed on LCD.
Please press left button once to wake up the CXM for normal operation.
General Safety and Usage Recommendation
Batteries store a large amount of energy. Never short circuit a battery under any
circumstances. We recommend connecting a fuse (slow acting type) directly to the
battery.
Batteries can produce flammable gases. Avoid making sparks, using fire or any naked
flame under any circumstances. Make sure that the battery room is ventilated.
(Load Amperehours) - SOC morning (State of Charge
out
22
min (Minimum Battery Voltage) -
bat