SD CARD / USB
1.
Turn on the speaker
2.
Plug in SD card or USB drive in the slot. The device will
automatically begin streaming music.
3.
Press the key
previous track or press and hold to decrease volume; press the
+
/
key
to go to next track or press and hold to increase volume.
BLUETOOTH
1.
Turn on speaker.
2.
Turn on Bluetooth on your external device and search for other
devices. Connect with this speaker. Input default PIN code "0000" if
necessary. Once the devices are paired, the music starts streaming.
3.
In case of an incoming call, press
4.
Pairing needs to be done only once. If paired previously, the
speaker will automatically connect to the external device.
AUX
Plug external device to the speaker with an AUX 3.5 mm cable. Use the
buttons on the bottom of the device to control music playback.
FM RADIO
For better signal reception, please plug in AUX cable as FM antenna first.
1.
Use the
2.
When in FM radio mode, press the
channels automatically. The device pre-plays available FM radio
programs and then stores. Indicator will blink blue quickly until
searching ends.
3.
After finishing searching, press
or press and hold to decrease volume; press
program or press and hold to increase volume.
4.
To change mode, press and hold
Owner's manual
to play/pause; press the key
button to enter FM radio mode.
to answer or reject.
button to search available
-
/
to go to previous channel
+
/
to go to next
button.
-
/
to go to
EN
11