Assign An Ip Address - Axis Q7414 Installationsanleitung

AXIS Q7414 Installation Guide

Assign an IP address

Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server, blades must be installed one at a time and
the AXIS Q7414 will use 192.168.0.90 as the default IP address for channel 1, 192.168.0.91 for
channel 2, 192.168.0.92 for channel 3, and 192.168.0.93 for channel 4.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of products you wish to install,
use the method that best suits your purpose.
Both of these free applications are available on the AXIS Network Video Product CD supplied with
this product, or they can be downloaded from www.axis.com
Method
AXIS IP Utility
See page 8
AXIS Camera Management
See page 9
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the
systems, see page 12.
Recommended for
Single video encoder
Small installations
Multiple products
Large installations
Installation on a different subnet
Operating system
Windows
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
Windows 7
AXIS Q7414
, e.g. in other operating
Page 7