Installation Steps; Package Contents - Axis Q7414 Installationsanleitung

AXIS Q7414 Installation Guide
AXIS Q7414 Video Encoder Blade
This installation guide provides instructions for installing the AXIS Q7414 Video Encoder Blade on
your network. For all other aspects of using the product, please see the User's Manual, available on
the CD included in this package, or from www.axis.com/techsup
Important!
• To mount the hardware in either the AXIS 291 1U Video Server Rack or the AXIS Q7900
Rack, please see the Installation Guide for the respective encoder rack
• This product must be used in compliance with local laws and regulations.

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 6.
3. Install the hardware. See page 6.
4. Assign an IP address. See page 7.
5. Set the password. See page 10.

Package contents

Item
Video encoder
CD
Printed Materials
Contact your dealer if anything is missing or damaged.
Installation Guide
Models/variants/notes
AXIS Q7414
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS Q7414 Installation Guide (this document)
Axis Warranty Document
Extra serial number label
Page 5