Duronic SAD Light Gebrauchsanleitung Seite 12

Cleaning Up a Broken Tube
Important
- Before you clean the unit, always switch it off, unplug it and let it cool off.
- Do not touch the unit with wet hands.
- Clean using a damp cloth, to which you can apply a little detergent if
necessary.
- Do not let water run into the appliance or spill water onto the appliance.
- Cleaning can be done once per month.
Storage
When the "Daylight" is not being used, it should be stored in a dry location
out of reach of children. Do not keep the "Daylight" connected to a power
source. The "Daylight" is designed to be stored in the following environmental
conditions:
1) Ambient temperature from +5oC (41oF) to 50oC (122 oF).
2) Relative humidity of max. 90%.
3) Atmospheric pressure: 700-1060hPa
Disposal
Please note that this product is marked with the WEEE symbol on the left.
This means that this product must not be disposed of together with ordinary
household waste, as electrical and electronic waste must be disposed of
separately.
If you have any questions, please contact your local authorities
responsible for waste disposal.
22
Failure Possible Causes
Main Power OFF
No light
Loose light tube
Defective light tube
One side of the
Light tube at the end of life
product is out of
order
Loose light tube
Important
This chapter lists the questions most frequently asked about the appliance. If
you cannot find the answer to your question, please contact customer service
or the dealer for assistance.
FAQ
Solutions
Turn on the switch
No power The appliance is not correctly
connected to your power
Re-install the light tube
Change the light tube
Change the light tube
Re-install the light tube
23