Work With The Machine; Setting For The Pre-Coat Application Range; Voltage Selector Switch (220V - 240V) Or (110V - 120V) - Schulze PRETREATmaker III Bedienungsanleitung

3.

Work with the machine

3.1 Setting for the pre-coat application range

Prior to commencement of work with the device, range of the pre-coat application should be set. This range is set by buttons on
the touch screen display. (pictures 1-3).
1. To set width of the pre-coat application, turn adequately the nozzles 1, 2, 3 or 4 on (picture 1).
2. To set length of the pre-coat application, use adequately the button on the touch screen display in "settings" (pictures 2-3).
3. To set the quantity of the pre-coat application, set the volume between 1 and 4 (picture 4).
The button "double pre-coat" allows selecting single or dual application of the pre-coat on the fabric (picture below).
Select the right setting.

3.2 Voltage selector switch (220V - 240V) or (110V - 120V)

If the preset setting of the switch is incorrect, set the switch to the proper voltage range of your area 220V/240V or 110V/120V.
Consult your dealer if you are unsure of the setting.
The switch is located in the power pack inside the machine (see the Photos).
Switch off and unplug the machine first.
Version 16.02 9/40