GBG DRINK MAGIC Betriebs- Und Wartungsanleitung Seite 49

D r i n k M a g i c
MAINTENANCE (cont.)
8º.-To disassemble the tap in 3 pieces,
please proceed as follows (Fig.10):
Press the lever 1º on the lateral sides (LV),
until the snug leave their lodgings (AG), 2º
Pull the lever upward, 3º Have the spring
tipped over (M) upward and outside of the
obturator, 4º Take the spring out of the
obturator holes.
9º.-To assemble the tap, please do as
follows (Fig.11):
Introduce 1º the spring (M) in the obturator
holes (AG), 2º Pull it upward until it is
inserted in the obturator (OB), 3º Introduce
the lever (LV) in the obturator, to make
pressure on the spring, 4º Insert the lever
snug in the obturator lodgings, 5º Once they
are in place, the spring must be pressing on
the lever, which will be in closed position.
SL310004000 Ed.01 - 01-2010
U s e r ' s i n s t r u c t i o n s a n d m a i n t e n a n c e m a n u a l
Figure 10
Figure 11
- 13_EN-