Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Put the attachable elements of the footprint into the attachment points of the seat until you hear
1-2
a clicking noise.
Pull down the knobs at both sides and open it as figure shown, then insert the fixed end into the
3
mounting hole. Same installation on the other side.
Leg assemblies: evenly slide both legs of upper assembly over lower legs. Do not click into place
4
until both legs have been partially inserted, then push lower legs until they click into place. Con-
firm that pins emerge completely trough holes. Repeat for other lower leg assembly.
Install safety harness into the corresponding seat slots.
5-6
Install safety harness into the corresponding backrest slots.
7
Put the cloth cover on the seat back.
8
Bring the footrest with the seat unit together by connecting the attachable elements of the seat
9
unit and the attachment points of the footrest.
Grap the tray as seen in the picture a and pull or push it to change the distance between the seat
10
and the tray.
Insert the newborn inlay into the seat (a). Fix it with the 5-point harness like shown in the picture (b).
11
The toy arch can be removed and placed on the chair to entertain the child.
12
The toy arch has a variety of tactile and sound activities. To fit it, slide the side hooks on the bar
along the armrest until they lock into the desired position, indicated by a „click" sound.
The toy arch consists of removable toys attached by velcro fasteners. Fasten the toys onto the bar
13-14
using the strings on the panel, as seen in (a).
Pull or push the food plate to change the distance between the plate and the seat.
15
Recline adjustment: Grasp the handle at back of seat and lift it. Set seat down in any of the recline
16
positions.
Put the attachable element of the footrest into the attachment points of the foot retainer.
17
To adjust the height of the foot rest, push the unlocking button on the side and move the foot
18
rest in the right position.
A five point harness is provided to restrain your child. Sliding adjusters are fitted as shown and
19
should be carefully adjusted on each side so the harness fits your child comfortably. To fasten the
harness push clips into buckle. To unfasten push clips in and remove from buckle.
Slide the footprint height adjustment upwards to fold the high chair.
20
Separate the tray from the high chair and push the two lower legs together.
21
Important — Keep these instructions for future reference.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
INSTRUCTIONS
EN
9
Werbung
