Franke FCR 625 TC Bedienungsanleitung Seite 11

USE
T1
Button Function
T1 Turns the Motor off.
Turns the motor on at speed one
T2
T3 Turns the Motor on at speed two
Press and hold for 2 seconds to activate
switch-off
(Motor+Lights). It is possible to change the
operating speed with this function activated.
Turns the Motor on at speed three
T4
Press and hold for 2 seconds to activate
Intensive speed with a timer set to 6 minutes,
after which it returns to the speed that was
set previously. Suitable to deal with
maximum levels of cooking fumes.
L Turns the Lighting system on and off at
maximum intensity.
Press and hold for 2 seconds to turn the
Lighting system on and off at reduced
intensity.
EN
Control panel
T2 T3
with a 30 minute
T4
Buttons T1+T2 are lit.
Buttons T1+T3 are lit.
Buttons T1+ (T2 or T3 or
delay T4, respectively) flash.
Buttons T1+T4 are lit.
The Button flashes.
Button on
Button on
L
1
11
1