Technical Specifications - DF-models KL-35 Bedienungsanleitung

Technical specifications

Model
Continuous current
Peak current
Resistance
Model
Motor
Batteries*
(NiMH or LiPo) with instal-
led fan
Batteries (NiMH or LiPo)
with 12V high-voltage fans
(accessories)
BEC outlet
Dimensions
(LxWxH)
Weight
* The installed fan (5V) may only be operated with the specified cell values. Only if you replace
the installed fan with a high-voltage fan with a higher operating voltage (12V), can the control-
ler also be operated with 7-9 cells of NiMH batteries or 3 cells of LiPo batteries.
KL-35
35A
190A
0.0015 ohm
1/10 car
3650 e-motor
On-road: >9T
Off-road: >12T
3650 e-motor
On-road: >12T
Off-road: >18T
4-6 NiMH cells
2 LiPo cells
7-9 NiMH cells
3 LiPo cells
6V / 1.5A
31.5x27.5x24
(without fan)
30g (without cables)
- 1 -
KL-60
60A
380A
0.0007 ohm
1/10 or 1/8 car
3650 e-motor
On-road: >5.5T
Off-road: >8.5T
3650 e-motor
On-road: >8.5T
Off-road: >13T
4-6 NiMH cells
2 LiPo cells
7-9 NiMH cells
3 LiPo cells
6V / 1.5A
31.5x27.5x24
(without fan)
32g (without cables)