GRAUPNER LiPo Balancer Plus Bedienungsanleitung Seite 12

Specifications, Conformity
accessories which have been tested and appro-
ved by Graupner, as they are known to be com-
patible, and work correctly and reliably. In this
case GRAUPNER assumes responsibility for the
product. GRAUPNER will not accept liability for
components not approved for this use, or acces-
sories made by other manufacturers, as it is not
possible to assess whether every non-Graupner
product is suitable for this use without incurring
a safety risk.
Specification
Input voltage:
Output voltage:
Battery type:
Cell count:
Max. charge current:
Voltage resolution:
Input:
Output:
Temperature range:
Dimensions (L x B x H):
(excl. cables)
Weight:
Environmental Protection Notes
Whenever you see this symbol on a
product, in the user instructions or
the packaging, it means that you
must not dispose of that item, or the
electronic components in it, in the
ordinary domestic waste when it
comes to the end of its useful life. The correct
method of disposal is to take it to your local coll-
ection point for recycling electrical and electronic
equipment.
Individual markings indicate which materials
can be recycled and re-used. You can make an
important contribution to the protection of our
shared environment by re-using the product,
recycling the basic materials or recycling redun-
dant equipment in other ways.
12 Specification, Conformity
max. 55 V
6,0 ~ 30 V
LiPo 3,7V/cell
LiIo 3,6V/cell
2 ~ 5 cells
10 A
+/- 5 mV
Gold-contact connec-
tors
Graupner multi-pin
gold-contact LiPo
connectors
0°C ... 35°C
approx. 85x45x18mm
approx. 70 g
Dry cells and rechargeable batteries must be re-
moved from the device and taken separately to a
suitable battery disposal centre.
In the case of RC models, the electronic com-
ponents - such as servos, receivers and speed
controllers - must be removed from the model,
and taken to an appropriate collection centre for
electrical waste.
If you don't know the location of your nearest dis-
posal centre, please enquire at your local council
office.
EU Conformity Declaration
We hereby declare that the following product:
LiPo Balancer plus, Order No. 3064
conforms with the essential protective require-
ments as laid down in the directive for harmo-
nising the statutory directives of the member
states concerning electro-magnetic interference
(89/336/EWG).
This product has been tested for electro-magne-
tic interference in accordance with the following
norms:
EN 50081-1
EN 50082-1
This declaration was produced by:
Graupner GmbH & Co. KG
Henriettenstr. 94-96
73230 Kirchheim/Teck
and is valid for the manufacturer / importer of
the product
73230 Kirchheim/Teck, Germany, on 29.11.05,
Hans Graupner
Managing Director