Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Closing:
•
Turn hande (5) anticlockwise until the shade is closed.
•
B) Avoid clamping, abrasion and premature wear and tear of fabric. Pull out the
fabric individually and completely between the ribs, apply the layers tight around
the pole and secure with the strap. The fabric should not fl ap in the wind.
•
Use the protective cover to protect your fabric and prolong the life of the canopy.
Disassembling:
•
Clear area arround the umbrella for laying down.
•
Release the secure screw.
•
Recomandation: Protect the canopy of dirt by using a plastic or protective cover.
•
Lift umbrella and lay down carefully, with a least 2 people!
•
Unscrew the anchorage screws on the support tube.
Maintenance and care:
•
Inspect the installation fi tting on a regular basis and tighten if necessary.
•
Lubricate the slider car mechanism as needed with a silicon spray to enhance the
ease of operation
•
Mast and frame can be washed with clear water periodically, if installation is in a
salty or industrial environment.
Canopy
•
For general maintenance, use a soft brush to remove dust and dry soil. Wash
down with clean, warm water (i.e. garden hose) every so often to avoid dirt beco-
ming engrained. Allow the fabric to air dry before closing the canopy.
•
If a thorough cleaning is necessary, sponge over the fabric using a mild soap so-
lution or detergent (pH value 7). Rinse well with plenty of water to remove all soap
residues.
•
Never use detergents, cleaning fl uids or solvents. Grease and oil stains may be
removed by using turpentine or similar with an absorbent cloth.
•
We recommend giving the canopy a good cleaning on a more frequent basis if
installed in a location where the canopy is likely to become soiled.
•
The cover should never be rolled up for long periods of time when wet or damp.
•
Use of protective cover extends the fabric's lifetime and slows down the fading
process.
Werbung
