Operation - auna multimedia Tallbox CD Anschluss- Und Anwendungshinweise

• Plug the power cord into a houshold mains socket and switch the device on with the power switch on
the rear (ON/OFF).
• Press INPUT on the tower speaker repeatedly to select the desired audio input (BT - CD - USB - SD -
AUX) or use the corresponding buttons on the remote control.
• Rotate the MIC VOL knob on the rear, to adjust the microphone share of the overall output volume.
• Rotate the ECHO knob, to adjust the intensity of the integrated reverb effect for the microphone channel.
CD / USB / SD
• Use INPUT or the RC to select the desired mode.
• CD: Insert audio CDs with the printed side facing up. CDs will be drawn in automatically when put it to
a certain extent. Do not use force. Press and hold INPUT to eject CDs.
• USB/SD: Insert an SD card or a USB drive containing MP3 or WAV files into the corresponding slot.
• Use , ,
• For USB or SD drives with folders contained, use the FOLDER+/- buttons on the RC to switch between
folders.
• Repeatedly press MODE on the RC to toggle the play modes NORMAL - REPEAT - RANDOM.
• Use VOL+/- to adjust the output volume.
AUX
Use INPUT or the AUX button on the RC to select AUX mode. Connect external media players to the AUX
socket using the supplied audio cable. Use your external device to operate your music playback.
BT
Use INPUT or the BT button on the RC to select BT mode. Activate BT on your smartphone/tablet and pair
with TALLBOY CD. Enter "0000" if prompted to enter a password. A signal ("beep") indicates successful
pairing.
Microphone / Karaoke
Unscrew the battery compartment lid from the lower side of the microphone and insert two batteries (type
AA) in the correct polarity as indicated on the inside. Screw the compartment lid back on, before switching
the microphone on.
8

Operation

and to operate the playback.