Herunterladen Diese Seite drucken

Blaupunkt RX+45e Bedienungsanleitung Seite 42

Digitales radio mit uhr

Werbung

RX+45e
DAB Mode
What is DAB Digital Radio?
DAB means Digital Audio Broadcasting. The difference between a DAB radio and a
conventional AM/FM radio is that broadcasts are transmitted digitally resulting in a high
quality audio sound*, without any hiss, fading or crackles.
Your DAB radio will automatically scan and find all the available stations for you. Each
station name, is shown on the display; all you need to do is scroll through the station
names and select the one that you would like to listen to, so it's very easy and quick to use.
For more information about DAB services and to find a list of stations available in your
area visit www.digitalradionow.com.
* Please note that the sound quality is dependent on a strong signal strength. Signal
strength can vary from area to area. To check the signal strength in your area visit
www.digitalradionow.com
Telescopic aerial
Please make sure that the aerial on the back of the radio is fully extended and adjusted
when you scan for DAB stations and listen to DAB radio (a vertical position is
recommended). This will ensure that the maximum signal strength is available as well as
the best possible sound quality.
Changing DAB/DAB+ stations
1. If you are not already in DAB mode, briefly press the 'Standby' button on the top of your
radio to go to DAB mode.
If you were listening to a DAB/DAB+ station when you switched the radio off then this
station will be automatically selected when you switch the radio back on.
2. Use the right hand rotary control on the top of the radio to scroll through the station
list.
3. When the station that you would like to listen to is displayed, wait for a few seconds
whilst your DAB radio tunes to that station.
Scanning for DAB/DAB+ stations
With DAB radio, additional stations and services regularly become available so it's a good
idea to carry out a scan every now and then to make sure that you have the most up to
date station listing stored within the memory of your radio.
If you have moved your radio to another location, e.g. if you go on holiday, then it's also a
good idea to carry out a scan.
1. If you are not already in DAB mode, briefly press the 'Standby' button to go to DAB
mode.
2. Briefly press the 'Scan' button on the top of your radio to carry out a auto full scan,
followed by 'Searching... ' will be displayed and a progress bar will show the progress of
the scan and number of stations found during the scan will also be displayed.
42

Werbung

loading