Werbung
B 5
26. Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation.
27. The ventilation should not be impeded by covering the ventilation opening with
items such as newspapers, table-cloths, curtains, etc.
28. The batteries should be drawn to the environmental aspects of batter y disposal.
The following label has been affixed to the unit, listing the proper procedure for
working with the laser beam:
CLASS 1 LASER PRODUCT LABEL-
This label is attached to the place as illustrated to inform that the apparatus contains a
laser component.
CLASS 1 LASER PRODUCT
KLASS 1 LASER APPARAT
LUOKEN 1 LAISERLAITE
KLASSE 1 LASER PRODUKT
WARNING LABEL INFORMING OF RADIATION -
This label is placed inside the unit. As shown in the illustration. To warn against further
measures on the unit. The equipment contains a laser radiating laser rays according to the
limit of laser product of class 1.
Notes:
a. Dirty or scratched CD may cause a skipping problem. Clean or replace the CD.
b. If an error display or malfunction occurs, disconnect the AC cord and remove all the
batteries. Then turn the power back on.
BEFORE OPERATION
Notes: CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage the appliance, care should be taken
of the followings items:
a. Usable compact discs. Use only compact disc with the mark shown below.
b. CD compact disc only with digital audio signals.
CAUTION
34
Werbung
