Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CD OPERATION
PROGRAM
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1. Press the "PROGRAM" button, the display will show "01" and flash.
2. Select desired track by using the "SKIP +" or "SKIP -" button.
3. Press the "PROGRAM" button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed. Press the "PLAY / PAUSE" button to play the
disc in the order you have programmed and the program indicator flashes.
6. Press the "STOP" button twice to terminate programmed play and the program indicator will turn off.
REPEAT
Press the "REPEAT" button before or during playing CD, a single track or all the tracks can be repeated.
Each press switches the repeat mode as follows:
1 - REPEAT 1 ( The repeat indicator is flashing. )
2 - REPEAT ALL ( The repeat indicator is steadily on. )
NORMAL
REPEAT 1
REPEAT ALL
PLAYBACK
3 - NORMAL PLAYBACK
GB-7
Werbung
Inhaltsverzeichnis
