Chal-Tec 10006325 Bedienungsanleitung Seite 22

Touch
By the function of touch response, you can control the
touch of fingers of playing the keyboard to allow
dynamic variation of volume.
Press [TOUCH] button to switch touch function of the keyboard. There are three touch types for choice
altogether.
1. Press [TOUCH] button to open touch response and LCD displays the symbol.
2. Press [TOUCH] button, do the loop operation in this four status: 001/002/003/OFF.
Reverb
Press the [REVERB] button, the reverb effect closed,
there was no symbol that displayed on the LCD, Press
this button again, The LCD displayed the symbol was
opened.
Chorus
Press [CHORUS] button to open default chorus effect
and CHORUS LCD displays the symbol. Press [CHORUS]
button again, the chord symbol fade from the LCD, the
chord function close.
Metronome
1. Press the [METRONOME] button to start the metronome sound of the metronome.
2. Press the [FUNCTION MENU ]button to select
(04 Beat Num.),then adjust the metronome
number by the +/- button
3. You can specify the metronome number of every subsection in the range 0,2,3....9
4. The metronome function closed if you press the [METRONOME] button again.
Transposition
Press TRANPOSE"+/-"button, the corresponding
musical scale goes up or goes down for one note
when you play the black and white keys, you can
adjust the musical scale for +12 levels upwards and
downwards. The transpose was effect only in the normal performance status ,the system will restore to the
default value if you press the transpose+/- buttons at the same time.
Function Menu
Press [FUNCTION MENU] button, the piano enters the menu choice state. You can choose the function items
by pressing [digit+/-] buttons.
Name Adjustment content
Metronome Beat
Keyboard split Split Point
Reverb type Reverb type
Reverb level Reverb level
Chorus type Chorus type
Chorus level Chorus level
LCD display
04 Beat Num.
25 Split Pt.
04 Reverb Ty
60 Reverb Lv
02 Chorus Ty
60 Chorus Lv
Adjustment range
0,2...9
1...61
0-7
0-127
0-7
0-127