Color Block Color Cube series Bedienungsanleitung Seite 6

3. Press this button to turn on and turn off Bluetooth. after
press the button, once the Bluetooth is on, The Bluetooth
indicator light will start to flash in Blue color and a voice "power
on " come out , then use your mobile phone Bluetooth to match
the "COLOR CUBE" Bluetooth, Once the Bluetooth is connected
with your mobile phone, Bluetooth indicator light will be kept on
blue color but not flash and a voice "Speaker connected " come
out , (Photo 2);
While connected, If you go away more than 10 Meters, The
Bluetooth indicator light will return to flash in Blue color and a
voice "speaker disconnected " come out , your mobile phone will
be disconnected with the speaker;
If you go back to the speaker less than 10 Meters, Bluetooth
indicator light will be kept on blue color but not flash and a voice
"Speaker connected " come out again and your Mobile phone will
connected the speaker automatically;
Bluetooth indicator light is inside the cube and could looks below
the speaker ;
Once the Bluetooth is connected, Press the button again the
Bluetooth will be off.
The Bluetooth indicator light will be off once the Bluetooth is off
(After Bluetooth is off and then
press and power on the BlueTooth again, you must manual
connect the speaker);
One mobile phone only could match with one Bluetooth to play
music at the same time.
4. Color selection button ： When the light is on Press
this button to choose your favorite color as shows
on remote control (Six colors).
photo 3
Bluetooth indicator
light (Inside)