switel HSIP 6000 Bedienungsanleitung Seite 14

AT A GLANCE
Monitor (Receiver)
1 LCD Screen: Displays video from the camera(s) or system operation interface
2 Microphone
3 Power Button/ Scan Button: Press and hold to turn the receiver on/off. Press and release while the
unit is powered on to turn Scan mode on/ off
4 Wireless Antenna
5 Speaker
6 Power Port: Connect to a local power outlet using the included power adapter
7 Reset: Using a paper clip or other thin object, push the reset button to restore the system to its
default settings
8 Ethernet Port (network)
9 Receiver Stand
10 Battery Cover
11 Volume Up
12 Volume Down
13 Talk. Press and hold to talk through the camera. Release to listen for a response
14 SD Card Slot. Insert SD card for recording videos
Camera (Transmitter)
1 Microphone – Captures the sound on camera side and transmits the sound from camera to monitor
2 6W white LEDs –White LED light comes with manual, motion and timer activation
3 Lens – Catches the video in front of the lens and transmits video from camera to receiver
12
3
2
5
1
6
7 8
4
9 10
11
12
13
14