Audio Out - Sony BRAVIA KDL-50WG6 series Referenz-Anleitung


CAM (Conditional Access Module)
• Provides access to pay TV services. For
details, refer to the instruction manual
supplied with your CAM.
• Do not insert the smart card directly into
the TV CAM slot. It must be fitted into the
Conditional Access Module provided by
your authorised dealer.
• CAM is not supported in some countries/
areas. Check with your authorised dealer.
• A CAM message may appear when you
switch to a digital programme after using
the Internet video.

USB 1,
• Connecting a large USB device may
interfere with other connected devices
beside it.
• When connecting a large USB device,
connect to the USB 1 port.
• Connect a USB HDD device to the USB 2
port.
 HDMI IN 1/2
• HDMI interface can transfer the digital
video and audio on a single cable.
•
< 12 mm
21 mm
<
• HDMI IN 1 ARC (Audio Return Channel)
Connect your audio system to the
HDMI IN 1 to route TV audio to your audio
system. An audio system that supports
HDMI ARC can send video to the TV, and
receive audio from the TV via the same
HDMI cable. If your audio system does not
support HDMI ARC, an additional
connection with DIGITAL AUDIO OUT
(OPTICAL) is necessary.
8
GB
2
USB 2 (HDD REC)*

 AUDIO OUT

/
• Supports 3-pole stereo mini jack only.
• To listen to the TV's sound through the
connected equipment, press HOME, then
select [System Settings] t [Setup] t [AV
Setup] t [Headphone/Audio Out] and
then select the desired item.
  (RF input),
• Connections for terrestrial/cable and
satellite.
Note
*1 For an external device which has only SCART AV
OUT, use a SCART-RCA adapter.
*2 Only on limited region/country/TV model.
2
(Satellite input)*