Herunterladen Inhalt Inhalt Diese Seite drucken

Floor Cleaning; Spare Parts - Kärcher FR 30 Me Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Assemble nozzle packet
Figure 2, see cover page
 Inser the O ring in the nut of the rotation
arm.
 Place the nozzle on it.
 Slightly fasten the nozzle with the Union
joint.
Figure 3, see cover page
Note:
The exit jet must be directed parallel to the
rotation arm.
 Adjust the wrench area of the nozzle
(width 10) so that it is parallel to the ro-
tation arm.
 Tighten the Union joint (width 22) using
a wrench.

Floor cleaning

Figure 4, see cover page
 Connect the steel pipe of the high pres-
sure cleaner to the FR 30 and tighten it
with wrenches (width 24).
Wall cleaning
Preparing water vacuuming
Note:
With the accompanying suction hose port a
vacuum cleaner or a drain hose can be
connected.
Dismounting the wheel set (if
necessary)
Figure 5, see cover page
 Unscrew the steering roller holder from
the device.
 Reattach the screws to the device.
Attaching the suction hose port
Figure 6, see cover page
 Remove cover.
Figure 7, see cover page
 Secure the suction hose port with the
accompanying screws and nuts.
6
Connecting to the high-pressure
Figure 8, see cover page
 Disconnect angle joint from the device
(spanner size 27).
 Screw on the trigger gun and tighten it.
Water vacuuming
Figure 9, see cover page
 Secure the hose on the suction hose
port by means of a hose clip.
Figure 10, see cover page
 Hold the device on the centre strut.
 Hold the device in a way that the hose
points down.
Suction
Figure 11, see cover page
 Remove cover.
Figure 12, see cover page
 Connect the suction hose to the suction
hose port.
Note:
Connection bushings are listed on the ac-
cessories sheet at the end of these operat-
ing instructions.
Figure 13, see cover page
 Hold the device on the centre strut.
 Hold the device in a way that the hose
points down.
 Protect the appliance against frost.
 Oil the steering rollers regularly.
 Do not allow bristles to deform during
storage.
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and
spare parts, please visit www.kaerch-
er.com.
– 2
EN
cleaner
Care

Spare parts

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis