Werbung
Verfügbare Sprachen
Verfügbare Sprachen
!
Caution
EN
•
This product is designed strictly for installation on a vertical wall in commercial and residential buildings.
It is constructed of wooden wall studs (40cm
concrete only.
•
This stand (this TV wall mount) is intended for use only with the maximum weights indicated. Use with
products heavier than the maximum weights indicated may result in instability causing possible injury.
•
This product is designed for easy connection of cables and peripherals. Avoid exerting excessive pulling
force during connection or this can damage the product.
•
This product is designed for use with all display models that incorporate respective VESA mounting
standard. Ensure the display is within the specified weight limit. Mounting any other type or model of
display is a potential safety risk. Philips declines all liability resulting from the unauthorized use of this wall
mount.
•
This product is not designed for installation on walls constructed of metal studs or studs with a pitch
exceeding 60cm
•
To avoid weakening the wall strength, drill at least 2.5cm
bracket is not perfectly level, adjust the angle of the display later, as described in the wall mount guide
(section 3, image
•
The roller mechanism is designed for a perfect leveling during installation. Avoid frequent moving of the
rollers inside the rail as this can unscrew the rollers and cause damage to the rollers and the display.
•
The wall or mounting surface must be capable of supporting the combined weight of the mount and the
display; otherwise the structure must be reinforced.
•
Safety gear and proper tools must be used. Failure to do so can result in property damage and/or serious
injury.
•
A minimum of two people are required for this installation. Do not attempt to install this mount alone
under any circumstance.
•
The wall mount allows a limited tilting movement if you pull on the bottom edge of the display. However,
for inserting and adjusting cables and connectors, we strongly advise you to dismount the display.
•
Follow all instructions and recommendations regarding suitable locations for mounting your display.
Consult the owner's manual for your display for more information.
Maintenance
•
After installation, brackets require regular maintenance and inspections periodically to prevent the
possibility of rot, deformation and looseness.
Warranty
•
Warranty information can be found at: www. philips.com/welcome. For technical support, send us an email
with the model number of the product and a detailed description of your problem to: accessorysupport@
philips.com
2
. If you are unsure of your wall composition, contact a qualified installer.
(24")
).
b
or 60cm
pitch), masonry (brick or stone) or solid
(16")
(24")
away from another drill hole. If the wall mount
(1")
Werbung
