LENCO DVT-1541 Bedienungsanleitung Seite 31

DVB-T Setup
1. Restore Default
Select Restore Default and press the ENTER button to display the confirm information on the
screen. Press the ENTER button to reset all the settings to the default status. Press the
SLOW/EXIT button to exit.
2. Clear Channels
Select Clear Channels and press the ENTER button to display the confirm information on the
screen. Press the ENTER button to clear all the channels. Press the SLOW/EXIT button to exit.
Booking list
Press the button to select Booking list and press the ENTER button to enter the menu as
shown below:
Event List
1. Event Id
Select Event Id and press the
select the desired item.
In the menu, press the ENTER button to enter
the Event List as shown below:
Press the SETUP button to return to the
previous menu.
Press the SLOW/EXIT button to exit.
In the menu, press the
select the desired items.
Press the SETUP button to return to the
previous menu.
Press the SLOW/EXIT button to exit.
direction button to enter. Press the
- 30 -
direction buttons to
direction buttons to