Wiring Your Controller - Rockwell MicroLogix 1000 Serie Installationsanleitung

Wiring Your Controller

Wire Type: Wire Size: (2 wire maximum per terminal screw)
Solid #14 to #22 AWG
Stranded #16 to #22 AWG
Important: The diameter of the terminal screw head is 5.5 mm (0.220 in.). The
input and output terminals of the MicroLogix 1000 controller are
designed for the following spade lugs:
We recommend using either of these AMP (or equal) spade lugs:
part number 53120-1, if using 22–16 AWG, or part number
53123-1, if using 16–14 AWG.
Installation Instructions
MicroLogix 1000 Programmable
Controllers
Call-out Dimension
C 6.35 mm (0.250 in.)
E 10.95 mm (0.431 in.) maximum
L 14.63 mm (0.576 in.) maximum
W 6.35 mm (0.250 in.)
X 3.56 mm (0.140 in.)
C+X 9.91 mm (0.390 in.) maximum
7