General Specifications - Rockwell MicroLogix 1000 Serie Installationsanleitung

Installation Instructions
MicroLogix 1000 Programmable
Controllers

General Specifications

Description: p Specification: 1761-L
16AWA 32AWA 10BWA 16BWA 32BWA
Memory Size and Type 1 K EEPROM (approximately 737 instruction words: 437 data words)
Power Supply Voltage 85–264V ac, 47-63 Hz
Power 120V ac 15 VA 19 VA 24 VA
Supply Supply
240V ac 21 VA 25 VA 32 VA
Usage Usage
24V dc Not Applicable
Power Supply Max 30A for 8 ms
Inrush Current
Not Applicable
24V dc Sensor Power 200 mA
(V dc at mA)
200 µF
Max Capacitive Load
(User 24V dc)
Power Cycles 50,000 minimum
Vibration
Operating: 5 Hz to 2k Hz, 0.381 mm (0.015 in.) peak to peak/2.5g panel mounted, 1hr per
axis
Non-operating: 5 Hz to 2k Hz, 0.762 mm (0.030 in.) peak to peak/5g, 1hr per axis
Shock Operating: 10g peak acceleration (7.5g DIN rail mounted) (11 1 ms duration) 3 times
each direction, each axis
Non-operating: 20g peak acceleration (11 1 ms duration), 3 times each direction, each axis
Terminal Screw Torque 0.9 N-m maximum (8.0 in.-lbs)
Electrostatic Discharge IEC801-2 @ 8K V
Radiated IEC801-3 @ 10 V/m, 27 MHz – 1000 MHz
Susceptibility 3V/m, 87 MHz – 108 MHz, 174 MHz – 230 MHz, and 470 MHz – 790 MHz
Fast Transient IEC801-4 @ 2K V Power Supply, I/O; 1K V Comms
Isolation 1500V ac
DIN rail mounted controller is 1g.
Relays are derated an additional 2.5g on 32 pt. controllers.
Refer to page 6 for vertical mounting specifications.
16
32AAA 16BBB 10BWB
16BWB
20.4–26.4V dc
26 VA 29 VA 16 VA Not Applicable
33 VA 36 VA 22 VA
5W
30A for 4 ms
Not Applicable
32BWB
32BBB
7W