Automatic Cleaning; Insert Pe Emptying And Disposal Bag; Dispose Of The Pe Emptying And Disposal Bag - AGP DS25L Bedienungsanleitung

▷ Remove the suction hose from the liquid before emptying.
After switching off, a small quantity of water can flow back out of
▷
the hose, as a result of the high suction level and the favourable
flow condition in the container.
▷ If you use it as a dry vacuum cleaner, you must insert dry filters.
If you change between dry and wet vacuum cleaning frequently,
we recommend using a second set of filters, preferably polyester
folding filter cassettes.
4
Cleaning the filter
The suction unit is fitted with an electro-magnetic filter cleaning
device which can shake off any dust adhered to the folded filter
cassettes.
4.1
Cleaning the filter
The vibration function (switch setting R or RA) should be activated
at the latest when the volume flow display (warning lamp) lights
up or when the warning signal sounds or when the suction output
sinks.

4.2 Automatic cleaning

Filter cleaning is performed (switch setting RA) automatically during
the next working break when the minimum volume flow level is
reached.
5 Emptying the container
Only permitted for dust with AGW's > 1mg/m
Switch the vacuum cleaner off, pull the mains plug out.
▷ Open the latches.
▷ Remove the cover and suction hose from the container.
▷ Empty the container by pouring out.
5.1
Dispose of the fleece filter bag
▷ Pull the mains plug out.
▷ Fit mouth protection.
▷ Remove suction hose, close off the suction spigot with a plug*.
▷ Open the side latches, remove the top section.
Carefully pull the flange off the suction spigot and close off the
▷
flange.
▷ Dispose of the vacuumed up material in accordance with legal
requirements.

5.2 Dispose of the PE emptying and disposal bag

▷ PE emptying and disposal bag: Switch the vacuum cleaner on,
shake the folding filter cassettes. Switch off the vacuum cleaner.
▷ Fit mouth protection.
▷ Remove suction hose, close off the suction spigot with a plug*.
▷ Open the side latches, remove the top section.
NOTE
NOTE
3
Before setting aside the top section, switch to >I< position, to
draw up any floating dust which may exist.
▷ Close off the PE emptying and disposal bag carefully with the
tape provided.
▷
Carefully pull the flange off the suction spigot and close it off
▷ Remove the PE emptying and disposal bag carefully from the
container
▷ Dispose of the vacuumed up material in accordance with legal
requirements.
5.3 Insert fleece filter bag
Only use fleece filter bags for dry vacuum cleaning.
▷ Slide the flange completely over the suction aperture.
Operating the rotary slider*
▶ Push the rotary slider* from the inside to the outside, turn
through 180° (see mark) and then push inwards again from
the outside through the suction spigot
▶ Place the rotary slider* in the suction aperture with the mark
▲ pointing upwards.
▷ Place the upper section on the container and close the side
latches.
(* depending on the equipment variant)

5.4 Insert PE emptying and disposal bag*

Only the vacuum cleaners class M and H with special containers
and rotary slider in the suction aperture of types IS/ISC ARM,
IS/ISC ARH and IS/ISC ARH-ASBEST are suitable for the use of
PE Emptying and disposal bags.
Operating the rotary slider*
▶ Push the rotary slider* from the inside to the outside, turn
through 180° (see mark) and then push inwards again from
the outside through the suction spigot.
▶ Place the rotary slider* in the suction aperture with the mark ●
pointing upwards.
NOTE
NOTE
NOTE
NOTE
GB - 19