Casadio Enea Gebrauch Und Installation Seite 22

note. These operations must be performed with the appliance
off.
automatic Grinder-Doser
The machine may be adjusted for different grindings (from fine
to course) via a screw (4) as shown on the graded indicator
(18).
On Demand Grinder-Doser
With the Automatic dose adjustment system.
With each adjustment of the grinders, the grinding time
for the coffee doses is automatically adjusted according
to the selected granulometry.
In the On Demand version, adjust the screw (4) on the grinder
for different types of coffee grounds (fine or coarse). Variations
are shown on the display screen as follows:
• Fine grounds › short granulometry bar, low reference
value;
• Coarse grounds › long granulometry bar, high reference
value.
If the coffee is dispensed too slowly, the grind of the coffee
beans is too fine. Turn the ring nut (4) anticlockwise to obtain
a coarser grind (the numbers on the indicator increase: 2 - 3
- 4 - ...).
If the coffee is dispensed too quickly, the grind of the coffee
beans is too coarse. Turn the ring nut (4) clockwise to obtain
a finer grind (the numbers on the ring nut decrease: 4 - 3 - 2
- ...).
7. Regulating the grind
18
On DEmanD VERSIOn
Granulometry
bar
Granulometry
bar
21
COaRSE
4
Fine grounds
Reference
value
Grinding
time
Course grounds
Reference
value
Grinding
time
FInELY