Operating Determinations - auna multimedia 10005639 Bedienungsanleitung

Operating determinations

The Auna wireless microphone systems enclose microphones with integrated transmitters which
serve for wireless signal transmission to the receiving unit. The systems operate within the VHF-
spectre (174 – 216 MHz). The transmission range is approx. 100 m and depends on the local condi-
tions. The units were designed for indoor use.
Approval
This wireless microphone system was tested in accordance with the European standards EN 300422-
1 V1.3.2, EN 300422-2 V1.2.2, EN 301489-9-1 V1.8.1, EN 301489-9-1 V1.4.1
2002+A1, EN 60065: 2006+A11, EN 60065: 2008+A2: 2010, EN 62479: 2010. Consequently, this
product adheres to the R&TTE directive of the European Union and does not need an individual EC
type examination of every member state. The approval number is
In some countries, the operation of this wireless system needs to be approved by the national tele-
coms regulatory authority. In Germany, it is necessary to apply for a frequency assignment at the
corresponding branch of the Federal Network Agency (BNetzA). The forms for the frequency assign-
ment can be found on the website of the Federal Network Agency: www.bundesnetzagentur.de.
Capability Characteristics
This wireless microphone set includes two microphones and one receiver. The receiver has two sepa-
rate channels which do not interfere with each other. The robust wireless microphones are ideal for
karaoke- or other public adress events.
• Connect the receiver to an electric outlet and insert batteries into the microphones.
• Put the antennae of the receiver upright.
• Switch on the receiver. The operation state will be signalled by the operation display LED.
• Now switch on the microphones.
• If the receiver receives the signals from the microphones correctly the LEDs RF-1 and RF-2 will
show.
• Single microphones can also being used.
The receiver
1. Power switch
2. CH A volume lever switch
3. CH B volume lever switch
and EN 60065:
6