Stac VISION 1.2 Bedienungsanleitung Seite 7

2.
Always pre-check the store tank for sufficient filling with original STAC
attempt to operate the S T A C
STAC ® Fog Fluid . Our 2 year warranty does not cover any damage that occurs from disre-
garding these particular instructions.
3.
Don't place the unit in a position that is too high above the stage. In contrast to fog from
dry ice, the fog created by the STAC
slight upward tendency. Take care for a free path for the fog, don't place any objects in
front of the fog outlet. By making inventive use of coloured lamps and strobe lights (e.g.
STAC ® CL 10 light unit) or ventilators, the dramatic effect of the fog can be even more in-
creased. Feel free to experiment to make full use of the 7 metres fog range of the STAC
Vision 1.2.
4.
Connect the unit to the mains supply with the supplied mains cord. The included pushbut-
ton is connected to the 'Remote Control' jack on the rear of the unit with the supplied 8 m
cable. After turning the STAC
After this period, the STAC
8
owner`s manual
Vision 1.2 without or with any other than original
®
Vision 1.2 does not 'stick' to the ground but has a
®
Vision 1.2 on, give the unit 6 minutes for an initial heatup.
®
Vision 1.2 is ready for operation.
®
owner`s manual STAC Vision 1.2 © Zeck Audio
Vision 1.2
® Fog Fluid . Never
®