Installation For Windows Xp - Siemens Gigaset PC Card 54 Kurzbedienungsanleitung

Gigaset PC Card 54 / -- / A31008-E505-B101-1-PED1 / shortref_pc_en.fm / 03.07.2003
Quick Installation Guide

Installation for Windows XP

First install the software for the Gigaset PC Card 54. Do not connect
!
the Gigaset PC Card 54 to your PC until the installation procedure
prompts you to do so!
If you insert the Gigaset PC Card 54 in your PC before installing the software, Windows
will automatically recognise the device and show the dialog box prompting for the
appropriate driver. Click on Cancel to close the dialog box. Remove the Gigaset PC Card
54 from your PC. Then proceed as described below.
Please note that you may require administrator rights for the installation
i
process.
To connect a Gigaset PC Card 54 to your PC, proceed as follows:
1. Close all running Windows programs.
2. Insert the supplied Installation CD in your CD-ROM drive.
The installation program will start automatically. (If installation does not start
automatically, run setup.exe from the supplied CD.)
3. Select the appropriate language.
4. Select Installation.
5. Once the welcome screen appears, click on Next.
6. If you accept the licence agreement, click on Yes.
7. Select the option Typical and click on Next.
8. When prompted, insert the Gigaset PC Card 54 in the PCMCIA slot of your PC.
9. Once Windows recognises the hardware, you will see a dialog box. Please select the
option Install software automatically and click on Next.
10. Windows will then copy the drivers from the Installation CD.
11. If a message about the compatibility test appears, click on Continue installation.
12. Finally click on Finish to complete installation.
13. Close the installation program with Exit.
14