Operation Of The System - Azusa SH-130 Bedienungsanleitung

button for more than 2 seconds to be fast forward.
b) In FM mode, press
this button for more than 2 seconds to auto scan FM. When scan the FM and call the
correct radio frequency, it will auto stop and stay to play this FM radio.
10. VOL-: In play mode, press this key to decrease the volume level.
11. VOL+: In play mode, press this key to increase the volume level.
12. Number key: You can select the track you want directly by using this number key.

Operation of the system

System operation on AC Power
1. Plug in the AC power to the power outlet from a power source. Make sure you are
using correct voltage when you plug in the system to AC power.
2. Switch the main power on, the LED on the body will be lit. After using the system,make
sure to turn the main power off to avoid over charge the battery built in.
3. When the AC power suddenly cut off, the built-in battery will power the system to work
no delay.
4. Fully hang up the antenna of the main frame to achieve the widest service range of
the wireless MIC.If the main receiver meets the same or similar channel strong interfe-
rence of the wireless electric wave, it occurs the noisy voice or interuption phenomenon.
At this time, adjust the antenna to reduce or delete the interference.
5. Adjust the Volume with the control knob to get the perfect sound.
Caution: You have to plug the system off the main power if you are not going to use it
for a while.
EN
24
Owner's manual
/FM UP button to add FM frequency +0.1 mHz. Press and hold