Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Converter Mounting
Clamp
Strap
Make connections between LNB and Converter with supplied 90 cm. F / F coaxial cables.
Swinging Arm Mount
Swinging arm
Customer Device Mounting
Make the necessary connections
with supplied 40 cm. F / F coaxial
cables.
Safety Instructions
Read carefully these instructions before connecting the unit.
The operating voltage is indicated on the nameplate of the power adapter.
To prevent fire, short circuit, shock hazard: Do not expose the unit to rain or moisture.
Install the unit in a dry location without infiltration or condensation of water.
Do not expose it to dripping or splashing.
Do not place objects filled with liquids, such as vases, on the apparatus.
If any liquid should accidentally fall into the cabinet, disconnect the power plug.
Refer to qualified technician before it's further operation.
To avoid any risk of overheating: Install the unit in a well aery location and keep a minimum distance of 10 cm around
the apparatus for sufficient ventilation.
Do not place any items such as newspapers, table-cloths, curtains ... on the unit that might cover the ventilation holes.
The unit must not be exposed to any source of heat (sun, heater,...).
Do not place any naked flame sources, such as lighted candles, on the apparatus.
Do not install the product in a dusty place.
Pull out power plug to make the different connections of cables.
To avoid electrical shock, do not open the housing.
Cleaning :
Only use a dry soft cloth to clean the cabinet.
Do not use solvent.
Servicing :
For repairing and servicing refer to qualified personnel.
Clamp
Strap
... or Mast Mount
Strap
Converter
Strap
REC. 1
IN
REC. 2
... or Wall Mount
Strap
80 mm
Werbung
Inhaltsverzeichnis
