Removing The Ground Coffee - La Cimbali Magnum Installations Anleitung

The measure grinder can be set with 2 different drawing
modes:
M "Manual" operation
(12).
2) Select the pre-chosen measure (single
) pressing the icon on the Touch Screen
3) When the icon on the Touch Screen display is released
the measure grinder operates for the set measure-time
and the ground coffee descends from the chute (7).
Grinding is stopped automatically.
Continuous grinding occurs if the icon
value 00.00. Grinding occurs continuously whilst the relative
icon is pressed .
Note: the dose value 00.00
paragraph.
P "Pre-selection" operation
1) Select beforehand on the Touch Screen display the
measure (single, double or continuous) that is desired
to be drawn; The active selection is represented by the
black square (displayed alternating) behind the cup
(12) ensuring that it presses the actuator (9).
Note: it is the actuator (9) pressure that operates the
grinders.
3) The measure grinder operates for the set measure-time
and the ground coffee descends from the chute (7).
Grinding is stopped automatically.
technician.
actuator (9).

10. Removing the ground coffee

or double
display.
is set to dose
relative to the icon
25 ml
is
P "PRE-SELECTION" OPERATION
P
P
P
DO NOT insert any object inside the coffee
chute (7).
Measure
The grinder is supplied with a measure on its side. The center
of the CF symbol corresponds to 25 ml and approximately
7.5 grams (can vary depending on the granule size and
type of coffee).
10 EN
Single measure
Continuous measure
5
7
9
12