Front Keys - VDO GP7 Bedienungsanleitung

FRONT KEYS

FRONT A AND C KEYS:
The buttons A and C, placed on the front side of the device, allow to recall software functions
connected to the device's use. For further information please see the software manual included
in the box.
A
C
96
CONNECTING THE DEVICE TO THE PC:
To connect VDO GP 7 to PC using the USB cable included in the pack, follow these instructions:
1. Connect the device and your PC using the USB DATA cable.
2. It will appear a window which will ask to connect the device to the PC (see the image beside)
or to proceed consulting.
3. Choose "YES" to connect to the PC: the device will be recognize as
a mass storage. Choose "NO" to go back to Navigation Software.
Once that the device is connected to the PC, on the display will
appear "connected and charging...".
4. To disconnect VDO GP 7 to the PC, press "OK", as below, to restart
the navigation software.
5. Now it is possible to remove the USB cable from the device.
ATTENTION:
While the device is connected to the PC, the Li-Ion battery inside get
charged.
CONNECTING THE
DEVICE TO THE PC
97