Doro Secure 350 Handbuch Seite 7

Use v/V to set the alarm call function ON or OFF, confirm with 0.
QUIET AL.
In quiet alarm mode, no voice or tone signal is heard when the alarm call
is made (see above). See also Alarm function, p.13.
Use v/V to set the alarm mode to quiet (ON) or normal (OFF) and con-
firm with 0.
AL.MESSAGE
Record the alarm message that will be played for the contacts stored as
"alarm contacts" in the Phonebook when activating the alarm function.
See also Alarm function, p.13.
Note! The alarm message should include your name, address, and how
to activate the speakerphone.
Example: "This is an emergency call from John Smith on 10, Long Street,
Middleton. I require immediate assistance. Press zero to connect this
call."
1. Scroll to AL.MESSAGE.
Press and hold 0 to record a new alarm message (max. 30 sec-
2.
onds). Start recording at the tone, and release 0 when finished.
Speak clearly and about 15–20 cm from the keypad.
Alternatively, press 0 briefly to play the recorded alarm message.
Press 0 to confirm and continue.
3.
RING LIGHT
To alert you to incoming calls, a flashing light can be activated when the
phone is ringing.
Select ON/OFF and confirm with 0.
CONTRAST
Select a suitable display contrast setting (1–4), and confirm with 0.
KEYTONE
Enable/disable the keytone beep.
Select ON/OFF and confirm with 0.
English
4